Miniature Base
Bases for Warhammer, D&D and other tabletops: choose shape, size and underside, several pieces at once.
STL + 3MFExport
0 €Cost
in browserRuns
How it works
Enter shape and diameter, pick a bevel on the top edge and optionally a pocket on the underside for magnets or a coin as weight. Up to 24 bases land in one file.
The presets contain the common sizes from 25 to 100 mm.
Printing notes
- Print with the underside down; the pocket is open from below and needs no supports.
- Glue the magnet in from below after printing and mind the polarity.
- For heavy figures use a coin pocket and glue a coin in.
Common questions
Which sizes are common?
25 mm and 32 mm for normal figures, 40 mm for larger ones, 50 to 100 mm for monsters. Oval bases are usually 60 × 35 or 75 × 42 mm.
Which magnet fits?
The standard is 6 × 2 mm. The pocket gets a small clearance automatically.